Seam and detail repair
A suitable area can be cleaned and repaired with the membrane system’s compatible splice and flashing materials. Poorly attached edges or unsuitable previous patches can require wider work.
EPDM Roofing in Piedmont, OK
EPDM rubber roofing needs compatible seams, flashings and a sound assembly beneath the membrane.
Free inspections with a roof walk when conditions allow.
EPDM Roofing Scope in Piedmont
EPDM is a thermoset rubber membrane. Its splice and flashing systems differ from heat-welded TPO, so identifying the installed material is essential before repairing a leak. A patch chosen only by roof color can be the wrong repair.
We examine the field membrane, taped seams, terminations and flashings at curbs and roof openings. The existing attachment and condition beneath the sheet help determine whether a localized repair is practical.
Request a free roof inspection
EPDM Roofing Options and Limits
Membrane condition
The field sheet, seams and points of movement are considered together. A sound-looking surface does not settle whether the insulation below is wet.
A new EPDM assembly
Replacement plans address deck condition, insulation, attachment and perimeter details. Material thickness and attachment are system choices, rather than a universal specification.
EPDM Roofing Work in Piedmont
Identify the roof and failure
We look at the existing membrane and its seam method, then follow the likely water path through the interrupted details.
Prepare the compatible repair or replacement
The condition below the sheet sets removal needs. Surface preparation and product compatibility guide the new connection.
Complete the roof details
The field, seams, curbs and terminations are connected as one system, with access and equipment needs included in the work plan.
EPDM Roofing Cost Drivers
Commercial roof pricing follows the assembly and building constraints. The residential shingle calculator does not apply to this system.
| Cost driver | What changes the work |
|---|---|
| Existing roof layers | Removal and disposal depend on the installed assembly and moisture. |
| Seams and flashing | The number and condition of joints and roof openings change repair scope. |
| Support and access | Deck repairs, insulation and occupied-building staging affect the project. |
EPDM Roofing FAQs
Can EPDM be heat welded like TPO?
No. EPDM rubber uses its compatible splice and flashing system rather than the TPO heat-welding method.
Can an EPDM leak be patched?
Yes, when the membrane can accept a compatible repair and the surrounding assembly is suitable. Moisture, loose attachment or widespread deterioration can require wider work.
Discuss the commercial roof
Tell us the building use, the roof system if known and what needs attention.
(405) 358-4906